Trimming Horses - Wahl LITHIUM PRO Series Instructions Manual

fig 17 fig 18
DESIRED LENGTH
0.8mm-1.8mm
1.2mm-2.7m
3mm
6mm
10mm
13mm

TRIMMING HORSES

This product is suitable for trimming areas including face,
ears, head and fetlocks. It is not designed as a full body
clipper.
• When using any electrical appliance around horses,
Wahl recommends the use of a circuit breaker to
minimise risk.
• Whilst trimming, take time to regularly brush hairs
and dirt from the blades. We recommend that you
use the hygienic spray to ensure grease and dirt
particles are washed from the blade surface. This
spray should be applied regularly during usage.
• Always re-oil the blades after using the hygienic
spray and wipe away any excess fluid.
• This appliance is designed for trimming horses and
ponies. Ensure the horse is dry, as clean as possible
and brushed thoroughly to remove grease and dirt
from the coat.
• Ideally have a responsible person to hold the horse
Position the trimmer with the blade flat to the coat
surface (45 degrees).
LITHIUM PRO SERIES CLIPPER
fig 19
ATTACHMENT DIRECTION OF CUT
none
none
comb #1
comb #2
comb #3
comb #4
fig 20 fig 21
against the grain
with the grain
against the grain
against the grain
against the grain
against he grain
19