Chamberlain WLED Manual
  1. Manuals
  2. Brands
  3. Chamberlain Manuals
  4. Garage Door Opener
  5. WLED
  6. Manual

Chamberlain WLED Manual

Belt drive led wi-fi garage door opener
Hide thumbs Also See for WLED:
Table of Contents

Advertisement

Quick Links

LED Wi-Fi
Belt Drive Model WLED
FOR RESIDENTIAL USE ONLY
LiftMaster
300 Windsor Drive
Oak Brook, IL 60523
Garage Door Opener
®
•
Please read this manual and the safety materials
carefully!
•
The door WILL NOT CLOSE unless the Protector
System
is connected and properly aligned.
®
•
Periodic checks of the garage door opener are
required to ensure safe operation.
•
This garage door opener is ONLY compatible with
MyQ
and Security+ 2.0
®
•
DO NOT install on a one-piece door if using devices
or features providing unattended close. Unattended
devices and features are to be used ONLY with
sectional doors.
•
Attach warning labels to the location indicated on
label.
Register your garage door opener to receive
updates and offers from LiftMaster
Take a photo of the camera icon
including the points ( ).
Send it in by texting
the photo to 71403 (US)
or visit www.liftmaster.photo (Global)
accessories.
®

Advertisement

Table of Contents
loading

Related Manuals for Chamberlain WLED

Summary of Contents for Chamberlain WLED

  • Page 1 LED Wi-Fi Garage Door Opener ® Belt Drive Model WLED • Please read this manual and the safety materials FOR RESIDENTIAL USE ONLY carefully! • The door WILL NOT CLOSE unless the Protector System is connected and properly aligned. ®...

  • Page 2: Table Of Contents

    Contents Preparation ........3 Assembly .

  • Page 3: Preparation

    ® Serial Number: Product S/N: Date of Purchase: ® Serial Number Product S/N...
  • Page 4 Check Signal Strength. If you see: Wi-Fi signal is strong. The garage door opener will connect to your Wi-Fi network. Wi-Fi signal is weak. The garage door opener may connect to your Wi-Fi network. If not, try one of the options below to improve the Wi-Fi signal: No Wi-Fi signal.
  • Page 5 5/32 3/16 7/16 5/16 7/16 9/16...
  • Page 6 Provided Not Provided...

  • Page 7: Assembly

    HARDWARE Washered Bolt 5/16"-18x1/2" Hex Screw #8x3/8" (Mounted in the garage (Packed with the door opener) sprocket cover) Model 8550W Washered Bolt Hex Screw 5/16"-18x1/2" #8x3/8"...
  • Page 8 (To motor unit) Spring Trolley Nut Nut ring slot Nut Ring Nut Ring BEFORE AFTER RELEASE 1" 1-1/4" (2.5 cm) (3.18 cm)
  • Page 10 OPTIONAL Unfinished CEILING Ceiling MOUNT FOR HEADER Header Wall BRACKET Vertical Centerline of Garage Door Structural Supports Level (Optional) Header Wall 2" (5 cm) Track Highest Point of Travel Door Sectional door with curved track...
  • Page 11 HARDWARE Lag Screw 5/16"-9x1-5/8" Header (Finished Ceiling) Bracket Ceiling Mounting Holes 6" (15 cm) Maximum Door Spring Vertical Centerline of Garage Door Lag Screw 5/16"-9 x 1-5/8" (Header Wall) Vertical Centerline of (Header Wall) Wall Mount (Garage Door) Garage Door 2x4 Structural Header Support...
  • Page 12 HARDWARE Clevis Pin 5/16" x 2-3/4" Ring Fastener Ring Fastener Clevis Pin 5/16" X 2-3/4" Connected Disconnected...
  • Page 13 HARDWARE Lock Washer 5/16" Hex Bolt 5/16"- 18x7/8" Nut 5/16"-18 FIGURE 2 FIGURE 1 Unfinished Ceiling Finished Ceiling Not Provided FIGURE 3 (Not Provided) Lag Screws 5/16"- 18x1-7/8" Measure Distance Hex Bolt 5/16"- 18x7/8", Lock Washer 5/16", Nut 5/16"-18...
  • Page 14 Trolley Release Arm...
  • Page 15 HARDWARE Self-Threading Screw 1/4"-14 x 5/8" FIGURE 2 FIGURE 1 Vertical Reinforcement Vertical Reinforcement Vertical Centerline Vertical Centerline of Garage Door of Garage Door Bolt 5/16"-18 x 2" (Not provided) Door Bracket Lock Washer 5/16" Door Bracket Self-Threading Screw 1/4"-14 x 5/8" Nut 5/16"-18 FIGURE 3 FIGURE 4...
  • Page 16 HARDWARE Clevis Pin 5/16" x 1-1/4" Hex Bolt 5/16"-18 x 7/8" Lock Washer 5/16" Clevis Pin 5/16" x 1" Ring Fastener Nut 5/16"-18 CORRECT INCORRECT Straight Straight Curved Door Door Arm Curved Door (Groove Door facing out) Ring Fastener Nut 5/16"-18 Clevis Pin 5/16"...

  • Page 17: Install The Door Control

    Wall 7/16" (11 mm) GANG BOX DRYWALL Drywall Anchor 6-32 x 1" 6AB x 1" DRYWALL Drywall Anchor GANG BOX 6AB x 1" 6-32 x 1" HARDWARE Screw Screw 6-32 x 1" (2) 6AB x 1" (2) Drywall Anchors (2)
  • Page 18 7/16" (11 mm) Staple...

  • Page 19: Install The Protector System

    Safety Reversing Sensor Safety Reversing Sensor 6" (15 cm) max. above floor 6" (15 cm) max. above floor Invisible Light Beam Protection Area...
  • Page 20 HARDWARE Carriage Bolt Wing Nut 1/4"-20 x 1/2" 1/4"-20 (Not provided) (Not provided) No more than 6 inches (15 cm) No more than 6 inches Wing Nut (15 cm) Carriage Bolt Wing Nut 1/4"-20 1/4"-20 x 1/2" 1/4"-20 Carriage Bolt Lens 1/4"-20 x 1/2"...
  • Page 21 (Not provided) Staple 7/16" (11 mm) Wing Nut 1/4"-20 Carriage Bolt 1/4"-20 x 1/2"...
  • Page 22 Pre-installed Safety reversing wires 7/16" sensor wires (11 mm) Not Provided Safety reversing Pre-installed wires sensor wires Yellow (for example) White White/Black Purple (for example) Yellow Purple (for example) (for example) Yellow Purple 7/16" (11 mm) To insert or remove the wires from the terminal, push in the tab with a screwdriver tip.

  • Page 23: Power

    TYPICAL WIRING PERMANENT WIRING Ground Tab Green Ground Black Wire Screw Ground Wire Black White Wire Wire...
  • Page 24 If the receiving sensor is in direct sunlight, switch it with sending sensor so it is on the opposite side of the door. (invisible light beam) Green LED Amber LED SENDING SENSOR RECEIVING SENSOR...

  • Page 25: Adjustments

    PROGRAMMING BUTTONS UP Button Adjustment Button DOWN Button Actual product may differ from image shown. DOWN (Close) UP (Open)
  • Page 26 PROGRAMMING BUTTONS UP Button Adjustment Button DOWN Button Actual product may differ from image shown.

  • Page 28: Battery Backup

    Battery Status LED...
  • Page 29 Battery Status LED...
  • Page 32 Learn Button An LED on the garage door opener will indicate Wi-Fi status. See table below. Navigation Buttons...
  • Page 33 Screen Push Bar Navigation Buttons LIGHT button Motion Sensor...
  • Page 34 Display the temperature in Fahrenheit or Celsius and show/hide the temperature. Select a language. Set duration for garage door opener light to stay on after operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the Motion sensor off/on, and turn the entry light feature off/on. Adjust the contrast of the screen.
  • Page 35 LEARN Button LEARN LED Press to continue. Press to continue. LEARN Button Adjustment Button...
  • Page 36 Manual release...

  • Page 40: Accessories

    Accessories 829LM Garage and Gate Monitor: 880LMW Smart Control Panel ® 823LM Remote Light Switch: 893MAX 3-Button MAX Remote Control: Monitor open/closed status Displays temperature, time Automatically control your for up to 4 MyQ ® compatible and system diagnostics; lights using your garage door Compatible with LiftMaster ®...

  • Page 42: Repair Parts

    Repair Parts Rail Assembly Parts Installation Parts Description Part Number Description Part Number Belt - for 7 foot door 041A5434-11A Curved Door Arm 041B0035B Belt - for 8 foot door 041A5434-13A Door Bracket with Clevis Pin and 041A5047-1 Fastener Belt - for 10 foot door 041A5434-14A Emergency Release Rope and 041A2828...
  • Page 43 Repair Parts WLED Garage Door Opener Parts Description Part Number Sprocket and Sprocket Cover with Screws 041C0589-2 Front End Panel with LED Light Connector/Driver Board 041D9202 LED Light Pod 041D2052 Transformer 041D0277-1 Cover 041D8859 Motor with Travel Module 041D8006-1 End Panel for Receiver Logic Board with LED Light...

Table of Contents