Clock Functions - Zanussi ZOA35660XK User Manual

CLOCK FUNCTIONS

CLOCK FUNCTIONS
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
HOW TO SET: CLOCK FUNCTIONS
- flashes when you connect the oven to the electrical supply, when there was a power cut or when
the timer is not set.
Step 1
- press repeatedly.
Step 2
,
After approximately 5 sec., the flashing stops and the display shows the time.
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knob for the oven functions and the knob for the temperature to the off position.
To set, change or check the time of day.
Only the top oven works without the set time.
To set how long the oven works.
The function works only for the main oven.
To set when the oven turns off.
The function works only for the main oven.
To combine functions: Duration and End Time.
The function works only for the main oven.
To set a countdown. This function has no effect on the operation
of the oven. You can set this function at any time, also when the
oven is off.
How to change: Time of Day
- starts to flash.
- press to set the time.
How to set: Duration
- starts to flash.
- press to set the duration.
.
Application
9