Intended Use - Omnitronic MES-I5BT2 User Manual

Wireless pa system
Table of Contents

Advertisement

Available languages

Available languages

Ambient Conditions
• The ambient temperature must always be between
-5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative
humidity must not exceed 50 % with an ambient
temperature of 45° C.
• This device must only be operated in an altitude
between -20 and 2000 m over NN.
• Never use the device during thunderstorms. Over
voltage
could
destroy
disconnect the device during thunderstorms.
• This device must never be operated or stockpiled
in surroundings where splash water, rain, moisture
or fog may harm the device. Moisture or very high
humidity can reduce the insulation and lead to
mortal electrical shocks.
• When using smoke machines, make sure that the
device is never exposed to the direct smoke jet and
is installed in a distance of 0.5 meters between
smoke machine and device.
Maximum Power
• The given maximum power of the speaker system
describes short-term peaks the system can handle
as a maximum. The correspondent RMS power is -
as of all comparable systems (also from other
manufacturers) - significantly lower. The maximum
power of the speaker system must never be
exceeded. When operating the speaker system,
please make sure that the loudspeakers always
sound well. When distortions can be heard, either
the amplifier or the loudspeaker is overloaded.
Overloads can quickly lead to amplifier or speaker
damage. In order to avoid damage, please reduce
the volume immediately when distortions can be
heard. When speaker systems are destroyed by
overload, the guarantee becomes void.
Installation
• Do not shake the device. Avoid brute force when
installing or operating the device. When choosing
the installation spot, please make sure that the
device is not exposed to extreme heat, moisture or
dust. There should not be any cables lying around.
You endanger your own and the safety of others!
Setup
• Operate the device only after having familiarized
with its functions. Do not permit operation by
persons not qualified for operating the device. Most
damages
are
the
operation!
Commercial Use
• Operating an amplification system in public or
industrial areas, a series of safety instructions have
to be followed. The operator must therefore inform
himself on the current safety instructions and
consider them.
Cleaning and Service
• Disconnect from mains before cleaning! Never use
solvents or aggressive detergents in order to clean
the device! Rather use a soft and damp cloth.
• There are no serviceable parts inside the device
except for the fuse. Maintenance and service
operations are only to be carried out by authorized
dealers! Should you need any spare parts, please
use genuine parts.
the
device.
Always
result
of
unprofessional
Modifications and Guarantee
• Never remove the serial barcode from the device
as this would make the guarantee void.
• Please consider that unauthorized modifications on
the speaker system are forbidden due to safety
reasons!
• If this device will be operated in any way different
to the one described in this manual, the product
may suffer damages and the guarantee becomes
void. Furthermore, any other operation may lead to
dangers like short-circuit, burns, electric shock, etc.
Batteries
• Never
damage
Damaging the casing of the rechargeable battery
might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable
battery. Do not throw the rechargeable battery or
the product into fire. There is a danger of fire and
explosion!
• Charge the rechargeable battery regularly, even if
you are not using the product. If regularly
recharged, the battery retains its capacity and is
ready to for use for several years and thus
extremely robust and long-lived. It is normal that a
certain amount of heat is generated during
charging.
• Do not try to short-circuit, recharge, disassemble or
heat batteries (danger of explosion!). Remove the
batteries if the device is not used for a longer
period of time. Damaged/leaking batteries may
cause harm to your skin–use safety gloves.

Intended Use

The PA system
applications. The PA system can be operated with
230 V, 50 Hz mains voltage, via the optional
rechargeable battery (12 V, 7 Ah) or via 12 V direct
current from an external source. This product was
designed for indoor use only.
Approval
This product is intended for use in the EU. The
operation in the 863-865 MHz frequency range is
generally approved and license-free in all EU
member countries. The operation in the 823-832
MHz frequency range is license-free in Germany,
however, is subject to restrictions in certain areas:
AT, LV. LT, PL, SE, GB (status as of 2018). Prior to
use, make sure that the desired frequencies are
approved and legal in your country. Consult your
national authority for possible requirements.
17 • EN
the
rechargeable
MES-15BT2
serves for mobile PA
battery.

Advertisement

Chapters

Table of Contents
loading

Table of Contents