Husqvarna LP 6505 Operator's Manual page 11

3. Set the throttle control to idle speed.
4. Turn the ignition key to the ignition position (A). The
indicators for battery charge and oil pressure come
on.
5. Turn the ignition key to the start position (B).
a) When the engine starts, immediately release the
ignition key. The ignition key goes to the neutral
position.
b) If the engine does not start in 10 seconds,
release the ignition key and wait 5 seconds
before you try again.
6. Let the engine operate at idle speed for 2–3 minutes.
1364 - 001 - 25.03.2020
7. Set the throttle control to full throttle.
To operate the product
Always operate the product with the throttle control set
to full throttle.
• To operate the product forward, move the control for
forward and rearward movement (A) forward.
A
• To operate the product rearward, move the control
for forward and rearward movement (A) rearward.
• To start the vibration, move the vibration control (B)
to the ON position.
• To stop the movement of the product, release the
control for forward and rearward movement.
B
• To stop the movement of the product in an
emergency, push the emergency stop button (C).
Note: The movement stops also if the control for
forward and rearward movement is in the forward or
rearward position.
To stop the product
1. Park the product on level ground.
B
A
C
11