Distance; Directions; Unity; Min. Speed - ALGE-Timing Timy SPEED Manual

2.2.1 Distance

Here you should indicate the distance to the mounted photocell before.
ATTENTION! Only distances without decimal place.
Confirm the indicated distance with one of the two „OK"-buttons.

2.2.2 Directions

You can chose between three settings:
C0 < -- > C1 Measuring from both directions possible
C0 -- > C1 Measuring only of direction Start RLS (green cable or C0)
C1 -- > C0 Measuring only of direction Stop RLS (red cable or C1)

2.2.3 Unity

Here you can adjust the unity of the speed:
km/h
mp/h
m/s

2.2.4 min. speed

In this program you can adjust the minimum speed for a valid measurement.

2.2.5 max. speed

In this program you can adjust the maximum speed for a valid measurement.

2.2.6 Print times

If it is adjusted to „OFF", it will print only the startnumber and the speed.
If it is adjusted to „ON", it will print additionally start- and finish-time as well as the run time.
Seite 4
Timy SPEED
kilometer per hour
miles per hour
meter per second