Page 2
Important Information General Before using your ALGE-TIMING device read the complete manual carefully. It is part of the device and contains important information about installation, safety and its intended use. This manual cannot cov- er all conceivable applications. For further information or in case of problems that are mentioned not at all or not sufficiently detailed, please contact your ALGE-TIMING representative.
Timy Commander Table of Contents Keypad and Implementing ....................5 Commander Programs ....................5 Change into another subprogram ................5 Commander Programs ....................5 ATT STN WIDTH ....................5 COUNTDOWN ......................6 3.2.1 Reset of Countdown ..................6 3.2.2 Adjustments for the Countdown in the Menu ............ 6 3.2.2.1 IF ELAPSED .....................
Timy Commander COUNTDOWN To display countdown times. There are different countdown modes adjustable. 3.2.1 Reset of Countdown You can reset the time during the countdown in all three types. Press the button . Timy will ask you: Reset, F0 and F1 = YES or F2 and F3 = NO. 3.2.2 Adjustments for the Countdown in the Menu Push -button and search for the programs <COMMANDER-PROG>...
Timy Commander 3.2.2.2 Format SSSSSS ...... Countdown of second only (up to 6 digits) HHHH:MM:SS ..... Countdown of hours (up to 4 digit), minutes and seconds DDDD:HH:MM:SS ..Countdown of days (up to 4 digit), hours, minutes and seconds MM:SS + SIGNAL ..Countdown in minutes and seconds with a horn output 3.2.2.3 Timeout Here you can adjust if you would like to stop the countdown time with the push button (ALGE Code: 023-xx) or with the button...
Timy Commander Start Display Program to control a start display board D-SDA1 for ski- jumping. 3.4.1 Adjustments for the Countdown in the Menu Push -button and search for the programs „COMMANDER-PROG“with the buttons . Confirm with . Now you can select different adjustments. ...
Timy Commander Football Terminal to show the game-time, result on a standard display board, D-LINE and football scoreboard. 3.5.1 Display and “F” Keys 3.5.1.1 “F0” Game or day time With the “F0” key you can switch between the game or day time.
Timy Commander 3.5.4 More adjustments 3.5.4.1 TIME Here you can adjust, whether the time counts up or down. Also you can enter a new day time. If you choose countdown, the next point can be adjusted. 3.5.4.2 ONLY MINUTES Adjustment possibilities are YES or NO. Yes means, when the time starts to count down (e.g.
Timy Commander 3.5.4.7 SCORE The adjustments are, “at game only” or “always”. AT GAME ONLY means, the score is only in the game time mode visible. ALWAYS means, the score is also visible in the daytime mode. 3.5.4.8 AUTO-STOP Automatic game time stop after 45 and 90 min. -11-...
Timy Commander Gaelic Football Gaelic Football, mostly played in Ireland, Scotland and Aus- tralia, two teams attempt to get the ball into the goal or the gate poles (above the goal) of the other one. For one ball in the goal (right goal) the team gets 3 points. For a ball between the gate poles, it receives 1 point.
Timy Commander 3.6.4.4 TEST Possibility to make a second automatic display board test. Power on test Day time test Day time off Power on test means, each time when you switch on the Timy and you go into the football program, the Timy will start the display board test which is explained at point 2.7.2.
Timy Commander F0, F1, C0 and green “OK” button count up F2, F3, C1 and red “OK” button count down You can also directly input a number and confirm it with one of the “OK” buttons. Two Counters Double counter upwards/downwards. Left counter F0, F1, C0 and green „OK“...
Timy Commander 3.10.4 Set 3 The most common way in tennis sports is to play on 3 sets (two winning sets). The displa board shows all three sets, the game and the player who serves. On a display board, appropriate to 3-set-tennis, it’s also possible to work with the program „universal“.
Timy Commander 3.11 Safe Driving The program „SAFE-DRIVING“ is a subprogram of „COMMANDER“. It`s used for training of „breaking and evading“ at the driving safety training. The display board (see picture below) is controlled by the Timy. For control, a cable as well as a radio system (Teledata TED) can be used.
Timy Commander Display time on the display board: With the key sequence <MENÜ> <DISPLAY> <DELAYTIME1> the drag time can be adjust- ed. If the value is 0, the display board remains unchanged, otherwise after expiration of the drag time, the display board will be deleted completely. Adjustments: Adjustments are not saved after switching-on/off since they are visible on the display imme- diately and therefore can be changed right away.
Timy Commander 3.12.1.1.2 STOP: The indicated time will be counted up and will stop at zero. In order to start the time once again, press the button . If you would like to reset the time, press the button The Timy will ask you “Reset, <F0> and <F1> = YES or <F2> and <F3Y = NO“. 3.12.1.1.3 STOP RESET After expiration of the countup (zero), the time will reset to the zero and stops there.
Timy Commander 3.13 Turnstile Special counter program for a turnstile. 3.14 Motor-Sport Shows the time of day on a display board. The format of the time you can shift to the left or right with the arrow keys . If you press the one of the F-keys (<F0>, <F1>, <F2>...
Need help?
Do you have a question about the Timy Commander and is the answer not in the manual?
Questions and answers