Defining Gvrp - TP-Link TL-SG3109 User Manual

9-port gigabit managed switch/24+4g gigabit managed switch/48+4g gigabit managed switch embedded web system
Hide thumbs Also See for TL-SG3109:
Table of Contents

Advertisement

1. Click System > Bridging Config > VLAN > GARP. The GARP Parameters Page opens:
Figure 77: GARP Parameters Page
The GARP Parameters Page contains the following fields:
Copy from Entry Number — Indicates the row
number from which GARP parameters are copied.
To Entry Number — Indicates the row number to
which GARP parameters are copied.
Interface — Displays the port or LAG on which GARP
is enabled.
Join Timer— Indicates the amount of time, in
centiseconds, that PDUs are transmitted. The default
value is 20 centiseconds.
Leave Timer— Indicates the amount of time lapse,
in centiseconds, that the device waits before leaving
its GARP state. Leave time is activated by a Leave All
Time message sent/received, and cancelled by the Join
message received. Leave time must be greater than or
equal to three times the join time. The default value is 60 centiseconds.
Leave All Timer — Indicates the amount of time lapse, in centiseconds, that all device waits before leaving the GARP
state. The leave all time must be greater than the leave time. The default value is 1000 centiseconds.
2. In the Copy From Entry Number field, enter the interface #; in the To Row Number(s) field, enter the row number of the
required interface.
3. Click
. The GARP parameters are modified, and the device is updated.
To modify GARP settings:
next to the item to modify. The GARP Parameters Settings Page opens:
1. Click
Figure 78: GARP Parameters Settings Page
2. Modify the Timer parameters.
3. Click
and the device is updated.

7.3.5 Defining GVRP

GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports
mapping, without having to individually configure each bridge and register VLAN membership.
To define GVRP on the device:
1. Click System > Bridging Config > VLAN > GARP > GVRP. The GVRP Parameters Page opens:
 
. The GARP parameters are modified,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-sl3452Tl-sl3428

Table of Contents