Section 6. Defining Ip Addresses; Defining Ip Addressing; Defining Ip Addresses - TP-Link TL-SG3109 User Manual

Section 6. Defining IP Addresses

This section provides information for defining IP addresses on the device using DHCP and ARP. In addition, this section
contains parameters for defining device default gateways, and Domain Name Servers.
This section contains the following topics:

Defining IP Addressing


Defining Domain Name System

6.1 Defining IP Addressing
This section provides information for assigning interface and default gateway IP addresses, and defining ARP and DHCP
parameters for the interfaces.
This section contains the following topics:

Defining IP Addresses


Defining the Default Gateway

Defining DHCP Addresses

Defining ARP

6.1.1 Defining IP Addresses
The IP Interface Page contains fields for assigning IP addresses. Packets are forwarded to the default IP when frames are
sent to a remote network. The configured IP address must belong to the same IP address subnet of one of the IP interfaces.
1. Click System > System Info > IP Configuration > IP Addressing. The IP Interface Page opens:
Figure 53: IP Interface Page
The IP Interface Page contains the following fields:
IP Address — Displays the currently configured IP

address.
Mask — Displays the currently configured IP address

mask.
Interface — Displays the interface used to manage the

device.
Dynamic — Indicates that the IP address is

dynamically created.
Static — Indicates the IP address is a static IP address.

Remove — Removes the selected IP address from the interface. The possible field values are:

– Checked — Removes the IP address from the interface.
– Unchecked — Maintains the IP address assigned to the Interface.
2. Click . The Add IP Interface Page opens: