Table of Contents
Advertisement
Problem
An acoustic signal
sounds and the appliance
deactivates.
An acoustic signal
sounds when the appli-
ance is deactivated.
The appliance deacti-
vates.
The residual heat indica-
tor does not come on.
There is no signal when
you touch the panel sen-
sor fields.
comes on.
comes on.
comes on.
and a number come
on.
Possible cause
There is water or fat
stains on the control
panel.
You put something on
one or more sensor
fields.
You put something on
the sensor field
The cooking zone is not
hot because it operated
only for a short time.
The signals are deactiva-
ted.
The Automatic Switch
Off operates.
The Child Safety Device
operates.
No cookware is on the
cooking zone.
The cookware is incor-
rect.
There is an error in the
appliance.
Remedy
Clean the control panel.
Remove the object from
the sensor fields.
Remove the object from
the sensor field.
.
If the cooking zone oper-
ated sufficiently long to be
hot, speak to the service
centre.
Activate the signals. Refer
to "OffSound control".
Deactivate the appliance
and activate it again.
Refer to the chapter "Daily
Use".
Put cookware on the
cooking zone.
Use the correct cookware.
Disconnect the appliance
from the electrical supply
for some time. Disconnect
the fuse from the electrical
system of the house. Con-
nect it again. If
on again, speak to the
service centre.
ENGLISH
13
comes
Advertisement
Table of Contents
