• This is a gentle cooking method, which
keeps a high level of the food's nutrient
content and colour.
• Using fats and oils
When the temperature is too high, the
fat begins to smoke (so-called "smok-
6. CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Sharp objects and abrasive clean-
ing agents will damage the appli-
For your safety, do not clean the
appliance with steam blasters or
Scratches or dark stains on the
glass ceramic have no effect on
how the appliance operates.
To remove the dirt:
– Remove immediately:melted
plastic, plastic foil, and food with
You cannot activate the
appliance or operate it.
The Power function is suitable for heating
large quantities of water.
You touched 2 or more
sensor fields at the same
The STOP+GO function
sugar. If not, the dirt can cause
damage to the appliance. Use a
special scraper for the glass . Put
the scraper on the glass surface at
an acute angle and move the blade
on the surface .
– Remove after the appliance is
sufficiently cool:limescale rings ,
water rings, fat stains, shiny metal-
lic discolorations. Use a special
cleaning agent for glass ceramic or
Clean the appliance with a moist cloth
and some detergent.
At the end rub the appliance dry
with a clean cloth.
Activate the appliance
again and set the heat
setting in less than 10
Touch only one sensor
Refer to the chapter "Daily