RAR3500 90° Service hatch Fig. 3: Function of the snap fixing Water connections Fig. 4: The water coil is connected inside the unit through holes which are made (during installation) on the upper side or through the side of the unit, possible places are marked with punch marks. SIRe Fig.
Page 5
RAR3500 PLSB PLSAC PLSRTX 70x33x23 mm PLSB PLSUR PLSUR 114x70x50 mm CC603 CC605 CC610 10 m CC615 15 m PLSAC CC403 30 m CJ4/CJ6 CC405 50 m CC410 10 m CC415 PLSRTX Type Ø VLSP VKF15LF DN15 VKF15NF DN15 VKF20 DN20 VKF25 DN25...
RAR3500 Wiring diagrams PLS Basic RAR3500A RAR3500E PLSRTX PLSUB1 SIReUB1 SIReRTX PLSB2 SIReB1/B2/B1EC (optional) (optional) 230V~ ROOM Pot. Unit ID ACTUATOR SUPPLY CC6XX SIReCC6XX L=2m (max 50 m) CC6XX (max 10 m) SIReCC6XX (max 50 m) PLSB2 SIReB1/B2/B1EC 230V~ ROOM Pot.
Page 9
RAR3500 Wiring diagrams PLS Basic RAR3500W PLSUB1 PLSRTX SIReUB1 SD230 SIReRTX PLSB2 SIReB1/B2/B1EC (optional) 230V~ (optional) ROOM Pot. Unit ID ACTUATOR SUPPLY CC6XX SIReCC6XX L=2m (max 50 m) L=1,5m CC6XX (max 10 m) SIReCC6XX (max 50 m) SD230 PLSB2 SIReB1/B2/B1EC 230V~ ROOM Pot.
Page 10
RAR3500 Output charts water RAR3500W Standard coil Supply water temperature:80 °C Water temperature: 80/60 °C Room temperature: +18 °C Room temperature: +18 °C Outlet air temperature: +35 °C* Type Airflow Output Return water Water Pressure Output * Outlet Water Pressure position temp.
Page 11
RAR3500 Output charts water Special coil RAR3500WLL Supply water temperature:55 °C Water temperature: 55/35 °C Room temperature: +18 °C Room temperature: +18 °C Outlet air temperature: +32 °C* Type Airflow Output Return water Water Pressure Output * Outlet Water Pressure position temp.
Page 12
RAR3500 Tehnical specifications RAR3500 A without heat Type Output Airflow* Sound Voltage Length Weight level* Amperage [kW] [dB(A)] (control) [mm] [kg] 1100/2300 42/62 230V~/2,45 A 1057 RAR3510A RAR3515A 1550/3400 43/63 230V~/3,5 A 1567 RAR3520A 2200/4800 45/64 230V~/5,2 A 2073 RAR3500 E with electrical heat ∆t* Type Output...
1. Frico mounting and operating instructions. 2. Hang up on threaded bars (M8) according to figure 2a (not included). Application area 3.
Page 14
Note that the unit shall be preceded by a cleaning is necessary. The level of cleaning regulating valve, see Frico valve kit. can vary depending on local conditions. To access the connections (DN20, 3/4”, Undertake cleaning at least twice a year.
Page 15
RAR3500 Overheating electric heater/coil in the unit and lift the The air curtain unit with electric heater is electric heater/coil out. equipped with an overheat protector. If it is 3. Install the new electric heater/coil in deployed due to overheating, reset as follows: reverse order to the above.
Page 16
RAR3500 Residual current circuit breaker (applies to units with electric heater) When the installation is protected by means of a residual current circuit breaker, which trips when the appliance is connected, this may be due to moisture in the heating element.