Fujitsu PRIMERGY RX200 S3 Options Manual page 24

Upgrading / replacing main memory
2
Figure 7: Installing a memory module
Ê Carefully press the memory module into the slot (1) until the ejector tabs on
both sides of it engage (2).
Ê Reinstall the air duct. Ensure that the hooks on the air duct (see
engage on the fan's rear panel.
Figure 8: Hooks of the air duct
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
24
chapter "Completion" on page
Options Guide
1
41f.
Main Memory
2
figure 8)
RX200 S3