Fujitsu PRIMERGY RX200 S3 Options Manual page 15

Safety Instructions
I
To protect the CD-ROM/DVD drive and prevent mechanical damage, as
well as premature wearing of the CDs, you should observe the following
advice:
– Only insert the CDs in the drive when needed and remove them after
use.
– Store the CDs in suitable sleeves.
– Protect the CDs from exposure to heat and direct sunlight.
Note on the laser
The CD-ROM/DVD drive contains a light-emitting diode (LED) classified
according to IEC 825-1:1993:LASER CLASS 1.
Modules with electrostatic-sensitive devices
Electrostatic-sensitive components are identified by the following sticker:
Figure 1: ESD label
V
CAUTION!
When you handle components fitted with ESDs, you must observe the
following points under all circumstances:
Remove the power plug from the power socket before inserting or
removing components containing ESDs.
You must always discharge static build-up (e.g. by touching a
grounded object) before working with such components.
The equipment and tools you use must be free of static charge.
Use a grounding cable designed for this purpose to connect yourself
to the system unit as you install components.
RX200 S3
Options Guide 15