Installation; Appropriate Handling - KTS-Electronic PULSE AR III User Manual

Note: To avoid incorrect conductivity values it is absolutely necessary to repeat the
adjustment of the soil balance. When pressing the Reset-button make sure, that
there are no metal parts in the soil.

6. Installation

The assembly is easy and carried out with a few simple steps:
1. Install the telescope bar by pushing the adjustable carbon tube into the armrest.
2. Connect the telescope bar with the searchcoil and wrap the cable of the coil
around the bar.
3. The electronic unit is placed in a bag; insert the plug of the searchcoil through the
lower opening of the bag in the intended mounting socket.

7. Appropriate handling

Hold the searchcoil approx. 2 to 5 cm parallel to the soil. Due to the pulse induction
method a swivelling of the searchcoil is not necessary.
Determine your own speed during the search. To search a large area without great
expenditure of time we recommend a speedy pace (no jogging).
KTS-Electronic GmbH & Co. KG – PULSE AR III
8