KTS-Electronic PULSE AR III User Manual page 5

LED:
The optical reference to a metal in the AM and ID mode is shown through the blue
LED. The green LED indicates the frequency pulse.
Back Side:
At the back 3 connection sockets are located:
1. Socket for coils
The connector for the coil is left-hand sided. The plug of the searchcoil has to be
plugged into the socket. Before removing the plug, the jack must be pressed; only
then it is possible to pull out the plug. The connector is compatible with all
searchcoils.
2. Socket for charger
3. Headphone socket
Any commercial headphones with 6.3 mm jack can be plugged. If you use the
headphones, the speaker is turned off. Matching, light-weight headphones are
provided.
5
KTS-Electronic GmbH & Co. KG – PULSE AR III