Table of Contents
Advertisement
13. Care
Your PULSE AR III is easy to clean, yet there are some aspects, which you should
bear in mind, in order to receive the optimal functionality.
Protect the electronic housing with a plastic bag in case you should get caught in
the rain, fog or sandstorm.
Always keep your equipment clean and dry and wipe off sand and dirt.
Note: Avoid extreme temperatures, since it is possible, that electronic elements are
damaged through these circumstances.
Metal detectors produce magnetic fields in the searchcoil and can possibly be
hindered in their operational capability while applied in the closer environment of
certain industrial plants or electronic devices.
14. Legal notice
Before you start searching please note that the monument protection as well as other
legal standards are relevant. KTS-Electronic GmbH & Co. KG assumes no
responsibility for possible legal violations.
In case of doubts we recommend a comprehensive consultation with an attorney or
national monument offices.
15. Warranty
According to the following conditions (see below) we remedy deficiencies free of
charge, if they are evidently based on manufacturing errors or defects and are
reported to us immediately after assessment of damage within 24 months after
delivery to the ultimate buyer.
Defective parts will be repaired gratuitous or will be replaced by efficient parts of our
choice. KTS GmbH & Co. KG reserves the right to exchange a device by an equal
valued replacement unit in case the returned product cannot be required in an
appropriate budget time frame.
On-site repairs cannot be demanded. Replaced, resp. exchanged parts will merge
into our property.
The guarantee claim expires in cases of improper handling, gross carelessness or
when repairs, modifications, additionally installed parts or extentions are carried out
from
persons
which
KTS-Electronic GmbH & Co. KG – PULSE AR III
are
not
authorized
on
our
part
to
do
so.
13
Advertisement
Table of Contents
