Nvr48/48-16P Series - Dahua NVR41 Series User Manual

Icon
Reverse/Pause/
6
Play Next/9
Play/Pause /5
USB port
Network
abnormal
indicator light
HDD abnormal
indicator light
Record light
IR Receiver

2.1.10 NVR48/48-16P Series

The front panel is shown as follows. See Figure 2-12.
Icon
Power button
Number button
Name Function
In normal playback or pause mode, click this
button to reverse playback.
In reverse playback, click this button to pause
playback.
In text mode, input number 6 (English character
M/N/O).
In playback mode, playback the next video.
In menu setup, go to down ward of the drop-down
list.
In text mode, input number 9 (English character
W/X/Y/Z).
In normal playback click this button to pause
playback.
In pause mode, click this button to resume
playback.
In text mode, input number 5(English character
J/K/L).
To connect USB storage device, USB mouse.
Network error occurs or there is no network
Net
connection, the light becomes red to alert you.
HDD error occurs or HDD capacity is below
HDD specified threshold value, the light becomes red
to alert you.
System is recording or not. It becomes on when
1-16
system is recording.
IR It is to receive the signal from the remote control.
Figure 2-12
Table 2-10
Name Function
Power button, press this button for three seconds
to boot up or shut down NVR.
Input Arabic number.
0-9
Switch channel.
13
User's Manual