Holiday - Dahua NVR41 Series User Manual

Parameter
System Time
Time Zone
Date Format
Date Separator
Time Format
DST
Start Time
End Time
NTP
Server Address
Port
Interval
Step 3 Click Next to save settings.

4.1.4.1.3 Holiday

Here you can add, edit, delete holiday. After you successfully set holiday information, you can
view holiday item on the record and snapshot period.
You can also configure holiday settings by selecting Main Menu > SYSTEM > General >
Holiday.
Step 1 Click Next.
The Holiday interface is displayed. See Figure 4-18.
Table 4-4 Data and time parameters
Description
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the
system, and the time in adjust automatically.
Do not change the system time randomly; otherwise the
recorded video cannot be searched. It is recommended to avoid
the recording period or stop recording first before you change
the system time.
In the Time Zone list, select a time zone for the system.
In the Date Format list, select a date format for the system.
In the Date Separator list, select a separator style for the date.
In the Time Format list, select 12-HOUR or 24-HOUR for the
time display style.
Enable the Daylight Saving Time function. Click Week or click
Date.
Configure the start time and end time for the DST.
Enable the NTP function to sync the Device time with the NTP
server.
If NTP is enabled, device time will be automatically
synchronized with server.
In the Server Address box, enter the IP address or domain
name of the corresponding NTP server.
Click Manual Update, the Device starts syncing with the server
immediately.
The system supports TCP protocol only and the default setting
is 123.
In the Interval box, enter the amount of time that you want the
Device to sync time with the NTP server. The value ranges from
0 to 65535.
105
User's Manual