Nvr42/42-P/42-8P Series - Dahua NVR41 Series User Manual

SN
2
3

2.1.6 NVR42/42-P/42-8P Series

The front panel is shown as below. See Figure 2-6.
Icon
Power button
Shift
Up/1
Down/4
Left/2
Right/3
ESC
Enter
Record
Name
Power indicator light
Network status indicator
light
Figure 2-6
Table 2-6
Name
Shift
ESC
ENTER
REC
8
Function
The red light becomes on when the power
connection is OK.
The red light becomes on when the network
connection is abnormal.
Function
Power button, press this button for three seconds
to boot up or shut down NVR.
In textbox, click this button to switch between
numeral, English(Small/Capitalized),donation and
etc.
Activate current control, modify setup, and then
move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character
G/H/I).
Shift current activated control.
When playback, click these buttons to control
playback bar.
In text mode, input number 2(English character
A/B/C)/3(English character D/E/F).
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time
monitor mode.
Confirm current operation.
Go to default button.
Go to menu.
Manually stop/start recording, working with
direction keys.
or numeral keys to select the recording channel.
User's Manual