Nvr48/48-16P Series - Dahua NVR41 Series User Manual

Name
RS-232
VGA
PoE PORTS

2.2.11 NVR48/48-16P Series

The NVR48 series rear panel is shown as below. See Figure 2-53.
The NVR48-16P series rear panel is shown as below. See Figure 2-54.
Name
Power switch
Power input port
MIC IN
MIC OUT
RS232 debug COM.
VGA video output
port
/
Figure 2-53
Figure 2-54
Table 2-24
/
/
Audio input port
Audio output port
39
Function
It is for general COM debug to configure IP
address or transfer transparent COM data.
VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
Bult-in Switch. Support PoE or ePoE function.
For ePoE series product, port 1 to port 8 are
the ePoE ports. ePoE port supports 300
meters@100Mbps, 800 meters@10Mbps.
Port 9 to port 16 are general PoE ports.
The 16 PoE series product supports total
150W.
Function
Power on-off button
Input AC 100~240V.
Bidirectional talk input port. It is to receive
the analog audio signal output from the
devices such as microphone, pickup.
Audio output port. It is to output the analog
audio signal to the devices such as the
sound box.
● Bidirectional talk output.
● Audio output on 1-window video monitor.
● Audio output on 1-window video
playback.
User's Manual