Step 2
Configure parameters.
Parameter
Channel
1, 2, 3, 4
Default
Step 3
Click Apply.
4.2.6 Encode
You can set video bit stream and image parameters.
4.2.6.1 Encode
You can set video bit stream parameters such as bit stream type, compression, resolution.
Figure 4-55
Table 4-15
Description
Select a channel.
Select Enable to enable privacy masking. The number
represents the number of masking areas. You can select a
number and drag masking areas to the screen, and you can
also change the size of areas or drag an area to other place.
You can drag up to 4 masking areas to one channel.
Set as device default configuration.
146
User's Manual