Advertisement
Switch Housing (continued)
Connect the plugs from the upper
and lower switch housings. Make
sure to line up the colored markings
on the connectors.
Make sure the lower switch housing is securely
attached to the upper switch housing. Failure
to properly secure all 3 assembly screws could
result in the switch housing fixture falling.
Lift the lower switch housing up until
the holes line up with the screw holes
in the upper switch housing. Install the
three switch housing screws, found in
the
hardware bag.
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
Install the included LED bulb into the
socket. When necessary, replace with
bulb of same wattage.
14
www.CasablancaFanCo.com
Lift the glass and attach it to
the light fixture using the three
thumbscrews. Tighten all three
screws securely by hand.
Cleaning the fan - use soft
brushes or cloths to prevent
scratching. Cleaning products
may damage the finishes.
1.888.227.2178
Advertisement
