Advertisement
Wiring
Receiver
Note: Push the bare metal ends of the
wires together and slide a wire nut over
them. Then, twist the wire nut clockwise
until tight. Give it a gentle pull to make
sure none of the wires are loose.
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
Connect the black (ungrounded) wire from the
ceiling to the black wire from the receiver.
Slide the
remote
receiver onto
the top of the
bracket.
Connect the white (grounded) wire
from the ceiling to both the white
wire from the receiver and the white
wire from the fan.
Turn the wires upward and push them carefully back through the hanger bracket
into the outlet box. Make sure that the wires are still attached to the wire nuts.
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
White
10
www.CasablancaFanCo.com
Connect the yellow wire
from the receiver to the
black wire from the fan.
Connect the three grounding
wires (green, green/yellow
stripe, or bare copper) coming
from the ceiling, downrod, and
hanging bracket.
Connect the blue wire
from the receiver to the
blue wire from the fan.
1.888.227.2178
Advertisement
