Table of Contents
Advertisement
E3B90ED_EN.book Page 28 Friday, February 23, 2007 12:38 PM
Auto Tuning
Auto Tuning Now
Auto Tuning Now
Wait for a moment.
Wait for a moment.
• Wait for several minutes to finish channel
storing.
After Auto Tuning has stopped:
• Use [PROG.
/
] or [the Number Buttons] to
change the channel.
• When you use [the Number Buttons], press [0]
first for a single digit number.
• Use [INPUT SELECT
select an external input channel ("AV1", "AV2" or
"AV3") of this unit.
To cancel auto tuning:
Press [RETURN] during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when either HDD,
DVD or VCR is in any recording mode (normal
recording, One-touch Timer Recording or Timer
Recording).
Manual Tuning
You can tune each channel and set their properties
manually.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Initial Setting" using
[Cursor
U
/
D
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
28
EN
--/--/--(---)
--:--
] or [PROG.
/
] to
], then press [ENTER].
01/01/07(Mon)
19:34
3
Select "Channel Setting" using
[Cursor
/
], then press [ENTER].
U
D
Initial Setting
OSD Language
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
4
Select "Manual Tuning" using
[Cursor
/
], then press [ENTER].
U
D
Initial Setting
OSD Language
Clock Setting
Auto Tuning
Channel Setting
Manual Tuning
TV Aspect
Move
Move
Select Video
Video Out
5
Select the position number of which
you want to change the setting using
[Cursor
/
], then press [ENTER].
U
D
Manual Tuning
Pos.
Channel
Decoder
Skip
P01
21
On
Off
P02
45
Off
Off
P03
63
Off
Off
P04
80
Off
Off
P05
88
Off
Off
P06
95
Off
Off
P07
110
Off
Off
P08
2
Off
On
• You can select position numbers 01 to 99.
• You can jump to the next or the previous page
using [SKIP
] or [SKIP
F
6
Press [Cursor
U
/
D
] to start
searching for the available channel.
• Search direction can be switched by pressing
[Cursor
/
].
U
D
• If you already know the channel number, you
can directly enter the channel number using
[the Number buttons]. Refer to the following
Channel Plan table and press the three digits to
select the channel number.
(To select channel 4, press [0] first and then
press [0] and [4]. Or press [4]. And when "4"
appears, wait for 2 seconds.)
• If this is the channel you want, press
[Cursor
].
P
01/01/07(Mon)
19:34
01/01/07(Mon)
19:34
01/01/07(Mon)
19:34
Station
ARD
---
---
---
---
---
---
---
].
B
Hide quick links:
Advertisement
Table of Contents
