Setting Bilingual Recording Audio - Toshiba RD-XV47KE Owner's Manual

E3B90ED_EN.book Page 40 Friday, February 23, 2007 12:38 PM
4
Select the desired setting using
[Cursor U / D
Recording
Auto Chapter [HDD]
Noise Reduction
Bilingual Recording Audio
Fast Dubbing Audio (Video Mode)
External Input Audio
Recording Audio Select [XP]
Initialise
The selected setting will be checked and
activated.
• The default setting is "15 minutes".
5
Press [SETUP] to exit.
Note
• Depending the recording time, a chapter with no
image may be created at the end.
• Chapter marks will automatically be added at the set
interval with "Auto Chapter [HDD]". (Chapter marks
will not be added while recording is paused.) To add
chapter marks manually, refer to "Adding or Deleting
Chapter Marks Manually" on page 78.
40
EN
], then press [ENTER].
01/01/07(Mon) 19:34
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Off
Setting Bilingual Recording
Audio
Video
DVD-RW DVD-RW DVD-R DVD-R D D VD+R DVD+RW VD+RW W
You can select either "Main" or "Sub" audio to record a
bilingual broadcast in Video mode and +VR mode.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Recording" using
[Cursor / ], then press [ENTER].
U D
Setup Menu 01/01/07(Mon)
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3
Select "Bilingual Recording Audio"
using [Cursor / ], then press
U D
[ENTER].
4
Select the desired setting using
[Cursor / ], then press [ENTER].
U D
Recording
Auto Chapter [HDD]
Noise Reduction
Main
Bilingual Recording Audio
Sub
Fast Dubbing Audio (Video Mode)
External Input Audio
Recording Audio Select [XP]
Initialise
• Main : Main audio
• Sub : Sub audio
The selected setting will be checked and
activated.
• The default setting is "Main".
5
Press [SETUP] to exit.
Note
• If you are recording onto a VR mode disc, both
"Main" and "Sub" will be recorded regardless of your
setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
• If you are recording the bilingual programme onto
the HDD with "Fast Dubbing Audio (Video Mode)"
set to "On", the recording will be made in whichever
the audio format type you choose here.
• Make sure to set the audio format as mentioned
above when you record on the HDD or a VR mode
DVD-RW disc while "Recording Audio Select [XP]"
is set to "LPCM".
DVD+R D D VD+R VD+R
19:34
01/01/07(Mon) 19:34