Satellite Link; Recording - Toshiba D-VR17KB Owner's Manual

E9GA0BD_EN.book Page 36 Monday, March 26, 2007 10:14 AM
If the recording time is partially overlapped:
• The timer programming with the earlier start time
(PROG. 2) has priority. PROG. 1 will start after
PROG. 2 recording is complete.
PROG. 1
PROG. 2
Actual
PROG. 2

recording

The first 2 minutes (at the longest) will be cut off.
If the recording time entirely overlaps:
• The shorter timer programming (PROG. 1) is not
recorded.
PROG. 1
PROG. 2
Actual
recording
Note for DVD recording
• If the recording time of two programmes are
overlapped, or the End time of a programme and the
Start time of another is same, the first 2 minutes (at
the longest) of the subsequent programme will be
cut off.
If the End time of the programme currently being
recorded and the Start time of the subsequent
programme are same:
• If PROG. 1 is a DVD recorded programme, the
beginning of PROG. 2 may be cut off.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
*If the cut off time exceeds 3 minutes, the error
number "E40" will appear in the Timer Programming
list.
36
EN
PROG. 1
PROG. 2
PROG. 2
The first 2 minutes
(at the longest) will be cut off.*

Satellite Link

You can set the unit to start recording whenever it
detects the video scart control from the external tuner.
Preparing for the Satellite Link Timer Recording:
[Preparation of the external tuner]
• The external tuner should be equipped with
some kind of timer function. Using timer function
of the tuner, set it to be turned on when it comes
to the time you want to start recording, and off
when it comes to the time you want to finish
recording. (Refer to the tuner's manual on how
to set the timer.)
• Make sure to turn off the external tuner when
you finish setting.
[Preparation of this unit]
• Make sure to select the desired Recording
mode beforehand.
External tuner
(not supplied)
Scart cable (not supplied)
DVD/VCR
AV2(DECODER)
AV1(TV)
1
Press [SAT.LINK].
2
Select the time, media or mode using
[U / D], then press [ENTER].
Satellite Link
DVD
Start Mode
VCR
0:00 DVD
To Standby Mode
3
Set the desired start time using
[U / D], then press [P].
• The hour can be selected among 0-23.
• Repeat this step to set the desired minutes.
4
Select the recording media using
[U / D], then press [P].
5
Select the recording mode using
[U / D].
Refer to "Recording Mode" on page 26 for DVD or
page 72 for VCR.
• If you want to edit the time, media or mode
/
press [L], then press [U
DVD ANTENNA
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT OUT VIDEO OUT
Y
IN
L P B
/C B
COAXIAL
R P R
/C R
OUT
XP
D] to correct them.