Panel; Recording - Toshiba D-VR17KB Owner's Manual

E9GA0BD_EN.book Page 20 Monday, March 26, 2007 10:14 AM
AUDIO IN
Audio S-Video
cable cable
(not (not
supplied) supplied)
DVD/VCR
AV2(DECODER)
AV1(TV)
Note for a TV with no S-Video input jack or Scart
socket:
• This unit has no RF modulator, so this type of TV
cannot be used.
• Only component connection is compatible with the
Progressive Scan.
Connecting to External Equipment
This unit has three input terminals, AV1 or AV2 on the
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.
Recording from a DVD player, VCR, Satellite
Box or other Audio-Video equipment with a
Scart output socket (AV2)
Scart cable (not supplied)
DVD/VCR
AV2(DECODER)
AV1(TV)
Note
• When you record a TV programme from a Satellite
Box, you must connect a Scart cable to
AV2(DECODER). (See page 36.)
• When AV2 is connected, the signal from the AV2 will
be output automatically. If you want to monitor the
signal from other input, you must press [DISPLAY]
first. Then, select the desired input to monitor with
[INPUT SELECT ].
Recording from a camcorder or other
Audio-Video equipment with no Scart output
socket (AV3)
If no S-Video input jack is available, connect to
VIDEO input jack on the front panel using an RCA
Video cable.
Change the setup when using S-VIDEO input jack.
(See page 38.)
20
EN
S-VIDEO IN Component
Video IN
Y P /C P /C
B B R R
Component
Video Cable
(not
supplied)
DVD ANTENNA
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT OUT VIDEO OUT
Y
IN
P
L B
/C B
COAXIAL
R P R
/C R
OUT
AV output
socket (Scart)
AV2 (DECODER)
DVD ANTENNA
DIGITAL AUDIO S-VIDEO COMPONENT
AUDIO OUT OUT OUT VIDEO OUT
Y IN
L P
B
/C B
COAXIAL
R P
R
/C
R
OUT
AV3 (Front)
DUBBING VCR/DVD REC
DVD
VCR DVD
AV3 S-VIDEO VIDEO
S-Video cable
(not supplied)
S-VIDEO AUDIO
OUT OUT
• When connecting an external device of monaural
output to this unit, use AUDIO L jack of AV3.
Digital Audio for Better Sound Quality
(Only for DVD)
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
DIGITAL
AUDIO OUT
COAXIAL
DVD/VCR DVD ANTENNA
DIGITAL AUDIO S-VIDEO COMPONENT
AV2(DECODER)
AUDIO OUT OUT OUT VIDEO OUT
Y IN
L P B
/C
B
COAXIAL
AV1(TV)
R P R
/C
R
OUT
The connections illustrated above are
optional for better sound.
1
For clear digital sound quality, use
the DIGITAL AUDIO OUT (COAXIAL)
jack to connect your digital audio
equipment.
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
L R
Audio cable
(not supplied)
Digital audio
input jack
COAXIAL
Coaxial cable
(not supplied)