One-Touch Timer Recording (Otr); Panel; Recording; Playback - Toshiba D-VR17KB Owner's Manual

E9GA0BD_EN.book Page 32 Monday, March 26, 2007 10:14 AM
One-touch Timer Recording
(OTR)
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
D D VD+R DVD+R VD+R
This is a simple way to set the recording time in
blocks of 30 minutes. Check that the disc you are
recording onto has enough space remaining for the
time you set.
1
Turn on the unit and insert a
recordable disc.
Make sure that the TV input is set on the unit.
2
Press [DVD].
3
Select the recording mode using
[REC MODE].
4
Select the desired channel to record
using [PROG.
[the Number buttons].
5
Press [REC ] repeatedly until the
I
desired recording time (30 minutes
to 8 hours) appears on the TV
screen.
One-touch Timer Recording will start.
Normal

Recording

8:00
• When the unit reaches the specified time, it will
be turned off automatically.
• To change the recording length during One-
touch Timer Recording, press [REC
repeatedly until the desired length appears.
• To cancel One-touch Timer Recording within the
specified time, press [STOP S].
Hint
• The remaining recording time will appear on the TV
screen during One-touch Timer Recording. Press
[DISPLAY] to see it on the TV screen.
• The remaining recording time will be displayed on
the front panel display during One-touch Timer
Recording.
• Unlike the timer recording, you can perform the
following operations during One-touch Timer
Recording.
- Turn off the power. (One-touch timer recording will
be cancelled.)
] or [STOP S] on the remote control.
- Use [REC
I
Note
• You cannot use the pause function during One-
touch Timer Recording.
• The unit will be turned off automatically under the
following conditions.
- No space remains on the disc.
- If a power failure occurs.
32
EN
DVD-R DVD-R DVD+RW D D VD+R VD+RW W
(See page 26.)
] or
/
0:30
1:00
7:30
]
I
• If DVD One-touch Timer Recording is completed
during VCR playback or recording, the DVD will be
in stop mode and the VCR keeps the current mode.
• When One-touch Timer Recording is finished and
the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press
[TIMER SET] to cancel the timer-standby mode to
use the unit continuously.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is powered off or press [DISPLAY] when it is
connected to AV2.