Table of Contents
Advertisement
Enable Closed Captioning
Steps to Enable Closed Caption:
1. Connect Video source to HDMI or YPbPr (Component) port(s).
2. Connect Video with supporting Closed Caption source to CVBS port.
3. A supporting Closed Caption Player/TV must be used for this function.
Insert Closed Captioning Support device into the CVBS (Composite) Port
Enable/Disable Closed Caption Functionality by checking the Checkbox as
shown above.
Note: Even with Closed Captioning enabled in the encoder, no closed captioning
will appear with source video disconnected.
'Save and Confirm' the changes made on the Encoder Page.
Note: To reset all changes made or saved go to the Administration Page and select "Reset to Default".
After pressing the 'Save and Confirm' button- the user will be brought back to the Overview page.
Leaving the encoder page without saving changes will cause the previous settings to be used.
NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-HDIPUS Manual v1.0
Page 14
Advertisement
Table of Contents
