IP Output Configurations
EIT/EPG output
EIT – every IP
service
If you want to distribute EIT information in connection with your IP
output, you can choose between:
distributing EIT information with every single IP service, or
use a barker channel for carrying all EIT information for the IP
output.
The EIT barker channel can be output in two ways depending on how
you distribute your IP output:
IP output method
IP output is distributed through
the Link sockets.
IP output is distributed through
an IP output module
1 Select the Network tab in the Service Tool.
Barker channel distribution method
EIT barker channel is output through
Link 2 on the main unit
EIT barker channel is output through
the AUX socket on the first IP output
module in the headend system
58