Connecting Units - Direct Connection; 1Xmain - 1Xsub - Triax TDX User Manual

Connecting units – Direct connection
1xMain – 1xSub
Headend Installation
Note that direct connection hardware configurations require the
Connection type field in the service tool‟s Admin/IP Settings/Setup
window to be set to „Direct‟.
Main Unit
Subunit
1. Insert SFP copper transceivers into the "Link 1"sockets on the
main headend and subunit headend.
2. Route a RJ45 Cat5e or better cable from the "Link 1" socket on the
main unit to the "Link 1" socket on subunit 1.
3. Set the "ID switch" on the main headend and subunit headend to
the following:
 Main unit = "3"
 Subunit = "1"
Link1 Link2
Link1 Link2
11
ID
3
ID
1