3D Histech Pannoramic DESK User Manual page 50

Pannoramic DESK 1.18.1 User's Guide
Set the type of TMA block on this panel.
1. Select the shape of the TMA spots (Rectangle spots or Circle spots).
2. Enter the number of rows and columns in the Rows and Columns fields or select the
3. Enter the distance between two spots on the X and the Y axis in µm (in the Spot
4. Enter the average diameter of the spots in the Diameter of spots (µm) field or
Grid tab
The Grid tab displays the previously set grid settings
May 29, 2014 - Rev. 1
appropriate values with the arrows.
distance X (µm) and Spot distance Y (µm) fields or select the appropriate values
with the arrows.
select the appropriate value with the arrows.
Figure 31 – TMA tool: Grid
3DHISTECH Ltd.
4 Software Description
50(77)