Radio Operation; Switching On Radio Operation; Rds Functions - Blaupunkt Pasadena CD71 Operating And Installation Instructions

RADIO OPERATION

Setting Up the Tuner
You can adjust the tuner for operation in Eu-
rope, Latin America or the USA.
Press the MENU button, 8.
Press the or
as is necessary for "TUNER" to appear
in the display.
Press the or
between "EUROPE", "LATIN" and
"USA".
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Radio operation
This device is equipped with an RDS radio
receiver. Many of the FM stations that can be
received transmit a signal in addition to the
program itself that contains information such
as the name of the station and the type of
program (PTY).
As soon as it can be received, the name of
the station is shown in the display . If desired,
the program type can be displayed.
You may read more about this in the section
on "Program Type (PTY)".

Switching on radio operation

If the radio is in one of the other operating
modes
Press the TUNE button, >.

RDS functions

The RDS Alternative Frequency and Regional
functions extend your radio's range of func-
tions (only in FM radio mode).
Alternative Frequency: If the RDS func-
tion is activated, the unit automatically
searches for the best receivable fre-
quency for the station that is currently
set.
Regional: At certain times, some radio
stations divide their programme into re-
gional programmes providing different
42
button, 7, as often
button, 7, to choose
regional content. You can use the Re-
gional function to prevent the car radio
from switching to alternative frequencies
that are providing different programme
content.
Note:
Regional is only available in EUROPE tuner
mode!
Regional must be separately activated/deac-
tivated in the radio functions menu.
Switching the RDS function on/off
To use the RDS Alternative Frequency and
Regional functions,
press the TUNE button > in radio
mode.
The radio functions menu appears in the dis-
play.
Press the softkey 4 assigned to the
"RDS" display item.
The RDS functions are active when "RDS" is
displayed inversed. When the RDS functions
are switched on/off, "REG ON" or "REG OFF"
appears briefly in the display.
Note:
In USA/LATIN tuner mode, the station name
display is switched on/off when the RDS
softkey 4 is pressed.
In USA/LATIN tuner mode, the Alternative
Frequency function is switched on/off using
the softkey 4 that is assigned to the "TA"
(Tuner Alternative) display item.
The Alternative Frequency function is activat-
ed when "TA" is displayed inversed.
To return to the main radio menu,
press the TUNE button > or wait eight
seconds. The settings are saved.
Switching Regional on/off
(only in EUROPE tuner mode)
To use the RDS Regional function,
press the TUNE button > in radio
mode.