To Use A One Touch Button; Setting/Changing A Personal Speed Dial Code - Toshiba Strata DP5000-UG-VC User Manual

Table 13 Special Characters
Entry Meaning
Indicates "stop." The One Touch button blinks rapidly and stops the delivery of the
*
Hold
+ remaining digits in the string until it is pressed again. Multiple "stops" can be
programmed into one string.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter additional
*
pause escape sequences. For example, to insert a 17-second pause, enter
(1~9)
display of a pause in the Speed Dial Number shows a "P" without specifying the
duration. In this example, you would see "PP."
** *
*
# #
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following
sequence under the One Touch button.
CNF #33***HOLD FB1 #30

CNF
– puts the caller on hold and gets new dial tone.
#33
– code to park call
**
– this special character outputs a single * which will select an available orbit
and display the selected orbit on the phone.
*
HOLD
user to view the selected orbit on the display. The dial string will restart from this
point when the One Touch button is pressed again.
FB1
– gets new dial tone on the PDN
#30
– code for All Call Page which allows the user to page the location of the
orbited call.

To Use a One Touch Button


Press the One Touch button.

Setting/Changing a Personal Speed Dial Code

See "Storing a System/Station Speed Dial Number" on page
Strata CIX DP5000-series Telephone UG
– This special character is a Stop. The dial string pauses and enables the
10/10
User Programming
One Touch Buttons
*9*8
. The
63.
89