Speed Dial Memo - Toshiba Strata DK280 User Manual

To Program Speed Dial
Names and Numbers:
button, then the
Speed Dial button.
2. Dial the desired speed
dial code.
3. Press the Mode
button.
4 .
Enter the name or
memo (refer to
Recording a Message
for method).
5 . Press the Mode
button.
6 .
Enter the desired
telephone number (16
digits maximum).
7. Press the Redial
button to record data in
memory.
8.
Repeat steps 2-7 to
enter more memos.
To Dial a Speed Dial
Number:
button when telephone
is idle.

SPEED DIAL MEMO

This feature allows an LCD user to program a 12-character name for each of
his/her 40 personal speed dial numbers. The memo pad of names may be
stepped through to select the appropriate party. Memos may also be added to
the 40 or 100 system speed dial codes, depending on your system's size, via the
station connected to port 000, station number
Press SDS or * if your telephone is not equipped with a Speed Dial button.
NN or NNN = Speed Dial Code. (lo-49 station) or (60-99 or 600 w 699:
depending on your particular system size, from station 200 only)
If a name was previously stored on this code, it will display on the top line of the
The name will appear on the bottom line of the LCD as you enter it.
The number will appear on the top line of the LCD as you enter it.
The LCD displays "MODE NO.?"
(usually 200).
4-7