Station-To-Station Message Waiting - Toshiba Strata DK280 User Manual

To Use Station-to-Station
Message Waiting:
Lift the handset.
1.
2 .
Dial the desired station
number.
3. The calling station user
Msg
presses the
button to set the Msg
LED on the called
station.
4 .
To answer the Msg
LED indication from
the called station,
Msg
press the button.
5.
To clear the Msg LED
from the calling station,
Intercom
press the
button, dial the station
number and press the
Msg
button twice (or
7 7).
6.
To clear the Msg LED
from the called station,
Intercom
press
button, dial # 4 0 9.
3. XX = The amount of time (06-60 seconds) that the telephone will ring
before Call Forward-No Answer or Call
invoked. The ring time does not have to be entered each time Call Fonvard
is set-on/y when you want to change the number of seconds the telephone
rings before it forwards.
4. if call forward is set:
Central Office (CO) lines-that ring at your station only will forward (CO
lines that ring into more than one station will not forward).
CO fine calls transferred to your station will forward.
n
Intercom calls will forward.
n
Call forward redirects the station hunt feature.

STATION-TO-STATION MESSAGE WAITING

If there is no answer (busy or DND), press the Msg button (or dial 7). This
causes the Msg LED on the called station to flash. The called station's LCD
displays the calling station's number.
When the returned call is answered, the flashing Msg LED will turn off
NOTE:
Up to four message waiting displays may be stored on the LCD. The station
number in the left-most position will be called when the Msg button is pressed.
To rotate the station numbers, press the Scroll button. The fourth message is
reserved for the Message Center.
Forward-Busy/No Answer is
2-3