Toshiba Strata DK280 User Manual page 16

, r - ?r Phone/Monitor:
N O . N N N
D O O R P H O N E 1A
Elapsed Time:
Intercom Number
Display:
N A M E / N U M B E R
D A T E D A Y T I M E
2. Called Station
N O . N N N
N A M E / N U M B E R I
Least Cost Routing
(LCR):
N O . N N N
D I A L T E L N U M B E R 1
N O . N N N
5 8 3 3 7 0 0
When you are called from a door phone, its designating characters are
displayed.
When you call a door phone, its desjgnating
NOTE:
The door phone designators are NA, NB, and/or NC (N =
which of the 12 possible door phones is caliing or is being called).
While you are making an outgoing Central Office (CO) line call, the elapsed time
of the call is displayed. Elapsed time automatically replaces the dialed number
on the display after a programmed period of time. (Timing begins when a LINE
button is pressed.)
NOTES:
1. On a CO line call, the display can be alternated between date/time, elapsed
time, and dialed number by pressing the
off before the call is staarted).
2. Elapsed time is displayed for 15 seconds after you hang up, and then
changes automatically to date/time.
To find out what your intercom or extension number is if does not appear on your
display, press intercom # 4 0 1 or CONF # 4 0 1 when on a CO or
Intercom Call and the intercom number will be displayed.
A name or title may be set in memory for each station. When an LCD station is
idle, the name displays on the top line of the LCD. When a station calls an LCD
station, the name of the calling station displays on the bottom line of the called
station's LCD.
When you are making a call via Least Cost Routing (LCR), your display will
prompt you to dial a number by displaying "Dial Tel Number".
As you dial the number, it is shown on your display.
characters are displayed.
1
Page
button (Soft Keys must be
l - 7