Technical Data - Pilous ARG 105 mobil Instruction Manual

2. Technical Data

MAIN MOTOR
V 230 - 1 phase
MAINÍ MOTOR V400
V 400 - 3 phase
COOLANT PUMP
MOTOR
SAW BLADE SPEED
V 230 - 1 phase
SAW BLADE SPEED
V 400 - 3 phase
CUTTING RANGES
ARM SWING
SAW BLADE SIZE
SAW BLADE
RUNNER WHEELS
DIAMETER
VICE OPERATING
HEIGHT
COOLANT TANK
MACHINE WEIGHT
MACHINE WEIGHT
ARG 130 Mobil only
Machine noise
- measured in conformity with ČSN EN ISO 3746:2011
The acoustic pressure level at the workplace: 74 dB (A), acoustic power level: 87 dB (A).
The measured values exceed the value specified in the Government Regulation No. 176/2008, section 1.7.4.2, article u) and
therefore ear protection must be used during the machine operation. The measurement was carried out while the machine was in
a steady state and the saw blade speed was 75 m/min and 80m/min. During the operational state with a technical load, the most
frequently used technological process was measured. Noise levels measured on the machines may vary depending on the type of
cut material, saw blade speed and other factors.
ARG 105 mobil
230 V, 50 Hz
0,55 kW
75 m/min
[mm]
90°
105
a
a
105
a
b
a×b 105x110
a
90°
60° 60° 60°
45° 45°
1385×13×0,65
160 mm
110 mm
ARG 130 TK
(super, mobil) table
230 V,
45° 60° 90°
70 40 130
65 40 130
65x85 40×45 180x100
90°
60°
45° 45°
approximately 15 litres
29 kg
(super, mobil) with a base
230 V, 50 Hz
0,55 kW
400 V, 50 Hz
0,37 / 0,5 kW
400 V, 50 Hz
65 W
75 m/min
40 / 80 m/min
45° 60°
115 70
105 60
115x75 70×60 180x100
90°
60° 60°
45° 45°
1730×13×0,65
180 mm
130 mm
77 kg
50 kg
ARG 130 K
230 V, 50 Hz
0,55 kW
400 V, 50 Hz
0,37 / 0,5 kW
230 V, 400 V, 50 Hz
65 W
75 m/min
40 / 80 m/min
90° 45° 60°
130 115 70
130 105 60
115x75 70×60
90°
60° 60°
45° 45°
1730×13×0,65
180 mm
900 mm
approximately 15 litres
100 kg
50+17 kg