8. Saw Blades
8.1. Saw Blade Design
High speed - material
The prerequisite of the correct cutting power of the machine is the use of high-quality saw blades. In order to achieve a high cutting
power, it is recommended to use bimetallic saw blades. The main saw blade component is a high-quality heat treated steel with a high
elasticity limit. The tooth edges are high-speed steel of the following quality: M 42, M 51.
M 42 - a saw blade for universal use for cutting metallic and non-ferrous materials within the whole range of quality classes up to the
45 HRC hardness. The saw blade is suitable for cutting full materials of all cross-sections and diameters, profiles, pipes and bundles.
Saw Blade Tooth Arrangement
a) Constant - tooth edge spacing always equal
b) Variable - the tooth edge space is different, repeating periodically. This modern saw blade design enables a bigger cutting range in
one saw blade type. It is able to eliminate vibrations caused by the tooth edge touching the material and thus to achieve a clean
smooth cut and longer service life.
CONSTANT - tooth size 4/4
4 teeth
1 inch
Laser welding head
Heat treated alloy steel
support strip
4 teeth
1 inch
Saw band
BIMETAL
VARIABLE - tooth size 3/4
4 teeth
2 inches
3 teeth