Machine Description - Pilous ARG 105 mobil Instruction Manual

4. Machine description

Manual metal-cutting band saws allow for cutting of a wide range of different materials. Arm feed to the cut, arm uplift, workpiece
feed, clamping and removal of workpieces are carried out manually. In ARG 130 super the feed to the cut is carried out by the weight
of the arm with the possibility of regulating the vertical vice pressure by a system of springs. A welded metal saw blade serves as the
cutting tool. The saw blade is mechanically tensioned on the blade wheel. It is powered by a wheel that is powered through a worm
gearbox by a motor. In the machining zone, the saw blade is guided through the saw blade guide heads. Outside the machining zone
the saw blade is protected by moving and fixed guards.
A arm
B saw blade
C fixed bar
D gearbox
E motor
ARG 105 mobil
L A F
M
K N
ARG 130 (super) TK
L A F
M N K B
J H
F vice
G turntable
H base
I coolant tank with a pump
J arm swing locking lever
B E C D
H J G
C E D
G I
K movable bar clamping lever
L saw blade tensioning
M control handle
N movable bar
ARG 130 (super) K
L F A
M K N B C E
J H G
D
I