Robotic Pool Cleaner MCC6/MTC6 User Instructions Contents 1. INTRODUCTION ............... 2 2. SPECIFICATIONS ..............2 3. WARNINGS AND CAUTIONS ........... 2 3.1. Warnings ................2 3.2. Cautions ................2 4. POOL CLEANER PARTS ............3 5. USING THE POOL CLEANER ............ 4 5.1.
Thank you for purchasing a Maytronics Robotic Pool Cleaner. We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface climbing brush enhance maximum pool hygiene.
4. POOL CLEANER PARTS Robotic Pool Cleaner Model MCC6 Robotic Pool Cleaner Model MTC6 Brushes Combined Brush Combined Brush For rough ceramic For rough ceramic surface and mosiac tiles. surface and mosiac tiles. Optional Brushes Optional Brushes PVC Brush Wonder Brush...
Remove them before use. While pushing in the handle buttons turn the ring so that the large projection on the ring lines up with the projection on the Pool Cleaner body. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 4 15/2/2012 10:48 AM...
Page 5
(1) lined up with the groove in the socket on the power supply and turning clockwise (2). Plug in the power supply and leave it in the OFF position. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 5 15/2/2012 10:48 AM...
Pool Cleaner to reach the farthest corner of the pool. Turn the power supply ON. The Pool Cleaner will now operate until it has reached the end of the cleaning cycle. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 6 15/2/2012 10:48 AM...
DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE. CAUTION Place the Pool Cleaner on the edge of the pool and let the water drain out. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 7 15/2/2012 10:48 AM...
Clean the filter bag with a hose. We recommend that you periodically wash the filter bag in a washing machine using the gentle cycle program. Periodically clean the brushes with a hose. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 8 15/2/2012 10:48 AM...
Note: Don’t let the filter cartridges dry out before cleaning. Unplug the power supply. Click CAUTION With the pool cleaner upside down open the bottom lid and pull it out. Open the clips and remove the filters. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 9 15/2/2012 10:48 AM...
Unplug the power supply. CAUTION Using a screwdriver remove the two screws on the impeller cover and remove it. Clean any debris that may be in the impeller. Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 10 15/2/2012 10:48 AM...
• Roll up the cable so that it has no kinks and place on the Caddy • Store the Pool Cleaner in a protected area either on its Caddy or simply upsidedown Robotic Pool Cleaner MCC6/MTC6 User Instructions -Book_8151255_MCC6-MTC6.indb 11...
2. Clean the filter bag/cartridge 3. For MCC6 only: push in the float on the cable side (see figure A) 4. Check the brushes to see if they are obstructed or worn out The Pool Cleaner floats 1.
Need help?
Do you have a question about the MCC6 and is the answer not in the manual?
Questions and answers