Count Value / Preset Value - Panasonic KW4M User Manual

＊After reaching the full scale (99999.9h）, the value reverts to 0.0h but continues to measure.
CT Detection
Full scale
ON-time
OFF-time
How to Reset ON/OFF-time
・Press <MODE>key while pressing <SET>key makes ON / OFF-time clear.
<SET>
<MODE>

3-6 Count Value / Preset Value

It displays present count value (pulse input value) and preset value.
・Press <COUNT> key to display count value (pulse input value).
・Press <COUNT> key to change count value to preset value.
Count value(COUNT)
Sample of count value:10000
<COUNT>
How to Enter the Preset Value
・Press <COUNT> continuously for about 3sec. at preset value display, "PSET" is blinking.
・Enter a preset value using <kW/kWh>,< A >, < V >, <CHARGE>, <TIME> and <COUNT>.
・Press <SET> to set the entered value. "PSET" stops blinking.
Position of Decimal Point
・The position of decimal point for count value and preset value is decided according to the setting at
'Pre-scale setting mode'.
Ex) When preset value set to 0.01, the decimal point is fixed the last 2 digit for count value and preset
value.
How to Reset Count value
・Press <MODE>key while pressing <SET>key makes count value clear.
<SET>
<MODE>
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Reset
→
Preset value(COUNT)
Sample of preset value:10000
<COUNT>
<COUNT>
Reset
OFF
7