Specifications; Basic Specifications - Toshiba ST-7000-C Series Owner's Manual

8. SPECIFICATIONS

8. SPECIFICATIONS
8.1

Basic Specifications

Item
Input voltage
DC output voltage
AC output voltage
Operating temperature
Relative humidity
Dimensions
Weight
Power cord
CPU
BIOS ROM
RAM Capacity
Type
Interface
Display interface
Hard Disk Drive (HDD)
CD-RW drive
LAN interface
Floppy Disk Drive (FDD)
Support OS
AC 100V-240V +10%, -10% 50/60Hz 4.8A-2.3A
DC24V +5%, -5%
AC 100V-240V +10%, -10% 50/60Hz 2.0A-1.0A
5 C to 35 C
10% to 80%RH (no condensation)
315 mm (W) x 466 mm (D) x 112.5 mm (including the rubber feed and
cable cover)
9.5 Kg (without 2 HDDs, CD, UPS battery, PCI, and packing materials)
A power cord is not included in this product. Please use one complied
with each country's safety standard. For details, please contact the
nearest TOSHIBA TEC service representative.
Intel Celeron 1.2 GHz with 256 KB secondary cache
1MB Flash ROM
Standard 128MB (Max. 2GB)
Max. 1GB/slot can be equipped.
DDR SDRAM PC2100, 2.5V unbuffered type, non ECC 184-pin DDR
SDRAM DIMM connector, 2 slots installed
RS-232C x 4, Parallel x 1, USB x 1, Drawer x 2 (24V type), PS/2 x 1,
PCI (Half size slot) x 2, +24V OUT (DIN 3-pin) x 1
RGB x 1 channel (on-board, standard)
Max. 2 units of 3.5-inch HDD (option) can be connected.
1 drive (local purchase is required),
CD connection kit required (option)
10 BASE-T, 100 BASE-TX (Wake on LAN support)
USB interface type (local purchase is required.)
Windows 2000, Windows XP, DOS
8- 1
Description
EO1-12030
8.1 Basic Specifications