Leviton Decora Illumatech Installation Instructions

C O L L E C T I O N B Y L E V I T O N • Leviton's Decora
• Large ON/OFF switch
WARNING:
AND REGULATIONS.
Single Pole (One location) or
WARNING:
3-Way (Multi-location)
ELECTRICIAN.
120VAC, 60Hz
WARNING:
DO NOT INSTALL TO CONTROL A RECEPTACLE, FLUORESCENT LIGHTING, A MOTOR- OR A
TRANSFORMER-OPERATED APPLIANCE OTHER THAN APPROPRIATE CEILING FANS.
Quiet Fan Speed Control
WARNING:
WITH CEILING FANS THAT ARE MARKED AS SUITABLE FOR USE WITH A SOLID-STATE FAN SPEED
Cat. No. IPF01-1L, 1.5A (Lighted) /
CONTROL AND IS RATED 120 VOLTS AC, TOTAL LOAD 1.5 AMPERES MAXIMUM.
WARNING:
ONLY. PLEASE REFER TO FAN MANUFACTURER'S INSTRUCTIONS OR RATING LABEL ON THE MOTOR TO
CONFIRM TYPE. USE WITH ANY OTHER TYPES OF MOTORS OR EQUIPMENT MAY CAUSE OVERHEATING
AND/OR DAMAGE TO THE MOTORS OR EQUIPMENT.
INSTALLATION INSTRUCTIONS
OTHER CAUTIONS:
1. USE ONLY ONE (1) SPEED CONTROL PER LOAD. THE SWITCH(ES) WILL TURN ON THE FAN AT THE
2. DISCONNECT POWER WHEN SERVICING FIXTURE.
3. USE THIS DEVICE ONLY WITH COPPER OR COPPER CLAD WIRE. WITH ALUMINUM WIRE USE ONLY
MULTI-GANG INSTALLATION:
R
DI-000-IPF01-00A
There is NO derating necessary for multi-gang installations of this Quiet Fan Speed control.
TO INSTALL:
1.
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for
the benefit of anyone else that this product at the time of its sale
by Leviton is free of defects in materials and workmanship under
normal and proper use for two years from the purchase date.
2. Remove existing wallplate and switch, if applicable.
Leviton's only obligation is to correct such defects by repair or
3. Remove 3/4¨ (1.9 cm) of insulation from each circuit
replacement, at its option, if within such two year period the
product is returned prepaid, with proof of purchase date, and a
description of the problem to Leviton Manufacturing Co., Inc.,
4. Connect wires per appropriate WIRING DIAGRAM as
Att: Quality Assurance Department, 59-25 Little Neck
Parkway, Little Neck, New York 11362-2591 (In Canada send
to Leviton Mfg. of Canada Ltd., 165 Hymus Blvd., Point Claire,
(Quebec), Canada H9R 1E9). This warranty excludes and there
is disclaimed liability for labor for removal of this product or
reinstallation. This warranty is void if this product is installed
improperly or in an improper environment, overloaded, misused,
opened, abused, or altered in any manner, or is not used under
normal operating conditions or not in accordance with any labels
or instructions. There are no other or implied warranties of any
kind, including merchantability and fitness for a particular purpose,
but if any implied warranty is required by the applicable jurisdiction,
the duration of any such implied warranty, including
5. Installation may now be completed by carefully positioning
merchantability and fitness for a particular purpose, is limited to
two years. Leviton is not liable for incidental, indirect, special, or
consequential damages, including without limitation, damage to,
or loss of use of, any equipment, lost sales or profits or delay or
failure to perform this warranty obligation. The remedies provided
6. Restore power at circuit breaker or fuse. Check for proper operation by pressing the ON/OFF push-button
herein are the exclusive remedies under this warranty, whether
based on contract, tort or otherwise.
For Technical Assistance Call:
1-800-824-3005 (U.S.A. Only)
7. Restore power at circuit breaker or fuse. INSTALLATION IS COMPLETE.
1 800 405-5320 (Canada Only)
www.leviton.com
R
DI-000-IPF01-00A
DI-000-IPF01-00A 1
FEATURES
® style design • Color conversion available
• ON/OFF LED indicates status of load
INSTALLATION INSTRUCTIONS
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH APPROPRIATE ELECTRICAL CODES
IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONSULT A QUALIFIED
TO AVOID OVERHEATING AND POSSIBLE DAMAGE TO THIS DEVICE AND OTHER EQUIPMENT,
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, THIS CONTROL IS TO BE USED
FOR USE ON CEILING PADDLE FANS WITH SPLIT-CAPACITOR OR SHADED POLE MOTORS
SPEED LEVEL SELECTED AT THE CONTROL.
DEVICES MARKED CO/ALR OR CU/AL.
WARNING: TO AVOID FIRE, SHOCK, OR DEATH;
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE Figure 1 - Fan Speed Control Functions
AND TEST THAT POWER IS OFF BEFORE WIRING!
conductor. Make sure the ends of wires are straight.
follows: NOTE: Common terminal of 3-Way Switch is
usually labeled and/or BLACK. Twist strands of each
lead tightly and, with circuit conductors push firmly into
appropriate wire connector. Screw connectors on
clockwise making sure no bare wires show below the wire
connectors. Secure each connector with electrical tape.
NOTE: For single pole applications, cap one BLACK lead
with an appropriate size wire connector. Secure connector
with electrical tape.
all wires to provide room in outlet box for control. Mount
control into box with mounting screws supplied.
(GREEN LED OFF) to turn ON the Fan Speed Control. Position the slider to each of the three levels: HIGH (top
of stroke), MEDIUM (middle of stroke), and LOW (bottom of stroke) (see Figure 1). Ensure that fan speed
®
changes accordingly. TURN OFF POWER and attach Decora
11/30/00, 1:56 PM
Slider
Mounting Strap
Side Sections
ON/OFF
Push-Button ON/OFF
Switch LED
wallplate.