Installation - Model#Uvf11A/Uvf11B/Uvf11B - Ispring UVF11A Installation And Maintenance Manual

Sediments and particles in the water block UV light and serve as shelters for germs. Thus, water coming into the UV
sanitizer must be clear (free of particles larger than 20 microns). It is recommended that you install the UV sanitizer
after the filters as the last stage.
1) Plug one end of the lamp
into the small power socket
with green wires.
Installation
Model# UVF11A/UVF11B/UVF11B-E
2)Plug the other end of the
green wires into the big
power socket of the lamp
holder
- 5 -
3) Plug the other end of the
lamp into the same big
power socket of the lamp
holder