(7.1) Changing Output Mode; (7.2) Changing Shading Correction Mode; (7.3) Changing Manual Shading Correction Mode; Option - Toshiba IK - HD1C Instruction Manual

7 OPTION

Move up and down
by pushing
MENU UP,DOWN
-- 7 OPTION
OUTPUT
SHADING
BAUD RATE
OSD OUTPUT
7 1 Changing OUTPUT mode
Move the " " to OUTPUT by pushing [MENU UP], [MENU DOWN] buttons.
Select either Y/P
b
7 2 Changing shading correction mode
Move the " " to SHADING by pushing [MENU UP], [MENU DOWN] buttons.
Select SET, MANUAL or OFF by pushing [DATA UP], [DATA DOWN] buttons.
7 3 Changing manual shading correction mode
Move the " " to MANUAL by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of manual shading correction by pushing [DATA UP], [DATA DOWN] buttons.
* When the shading correction mode is set to anything other than MANUAL, the display turns off, so
the setting cannot be made.
Select the desired
value by pushing
DATA UP,DOWN
-- <FILE A>
Y/P /P
b r
OFF
9600bps
ALL ON
/P or RGB by pushing [DATA UP], [DATA DOWN] buttons.
r
DATA UP
128 0
DATA DOWN
OUTPUT Y/P /P
b
SHADING MODE SET, MANUAL, OFF
RS232C baud rate 9600bps, 19200bps
OSD OUTPUT
127
29
, RGB
r
ALL ON, Analog, Digital