Table of Contents
Advertisement
The available picture area is shown by the shading correction on the screen that is parted in 64.
PRESET A
PRESET E
Note:
These available picture areas are not displayed on the screen.
3 2 Changing the setting in ATW(Automatic Tracking White balance) mode
Move up and down
by pushing
MENU UP,DOWN
-- 3 WHT BAL -- <FILE A>
MODE
R PAINT
B PAINT
(a) Changing R PAINT
Move the " " to R PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of red paint by pushing [DATA UP], [DATA DOWN] buttons.
Red is decreased.
(b) Changing B PAINT
Move the " " to B PAINT by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of blue paint by pushing [DATA UP], [DATA DOWN] buttons.
Blue is decreased.
PRESET B
Select the desired
value by pushing
DATA UP,DOWN
ATW
0
0
DATA UP
10
0
DATA DOWN
DATA UP
10
0
DATA DOWN
PRESET C
White balance mode AWB, ATW, MANUAL
R PAINT adjustment -10 to 10
B PAINT adjustment -10 to 10
Red is increased.
10
Blue is increased.
10
23
PRESET D
Advertisement
Table of Contents
