Advertisement
JKSSS+ Series
SP.10 Set Password (Setpoint Page 10)
(Security Level: 3)
The soft starter has three levels of user programmable
setpoint screens. Level one setpoints do not require a
password because the data contained in level one is basic
nameplate data and starter control. Level two setpoint
screens require a three-digit password to configure the
protection schemes. Level three setpoint screens require
a four-digit password to access the full range of protection
and starter schemes.
SP10.1 Set Level 2 Password: This level uses a 3-digit
password. The default level 2 password is 100.
SP10.2 Set Level 3 Password: Level three uses a 4-digit
password. The default level 3 password is 1000.
MENU
(Hit DOWN ARROW nine times)
PAGE 10 SECURITY
SET PASSWORD
2.3 - 4.2KV
SET LEVEL 2
PASSWORD: 100
Range: 000 - 999
SET LEVEL 3
PASSWORD: 1000
Range: 0000 - 9999
JKSSS+ Series - 65
Advertisement
