Advertisement
JKSSS+ Series
JKSSS+ Series - 98
DISPOSAL
Contact your state environmental agency for details on disposal of electrical
components and packaging in your particular area.
STORAGE
If the starter is to be stored for any length of time prior to installation, the
following precautions should be taken:
1) The original packing should be restored, if possible.
2) Do not subject the equipment to moisture or sun rays. Store in cool, clean,
and dry location.
3) Place a dust cover over the starter packaging to protect against dirt and
moisture.
4) Store in an upright position.
INSPECTION DURING STORAGE
Routine scheduled inspection is necessary if storage is for an extended
period. The unit should be checked for condensation, moisture, corrosion,
and vermin.
Prior to installation, the starter should be carefully examined for evidence of
physical damage, corrosion, or other deterioration.
The MAINTENANCE section of this manual describes various types of
inspections recommended for this starter during the operation period.
2.3 - 4.2KV
Advertisement
